Safety instructions for hot air gun tools

Use and precautions of hot air gun tools:

1) select the appropriate hot air gun tools according to the use, and use the instructions under the guidance, remember not to abuse the hot air gun tool.

2) if the switch can not be switched on or turn off the tool power supply, the hot air gun tool can not be used to avoid the occurrence of safety accidents.

3) before any adjustment, replacement of accessories or storage of electric tools, the plug must be removed from the power supply and / or the battery box will be disengaged from the power supply.

4) store unused power tools outside the children's range, and do not operate the hot air gun tools that are not familiar with the hot air gun tools or those who are not aware of the instructions.

5) in the work environment such as damp heat, rain and snow, the tools with corresponding protection level should be used.

6) maintain hot air gun tools. Check the installation deviation or jam of the moving parts, the breakage of parts and the other conditions that affect the operation of the hot air gun tool. If damaged, the hot air gun tool must be repaired before use.

7) use the hot air gun tool according to the operating instructions and the special type requirements of the hot air gun tools intended to be used, considering the operating conditions and the operations performed.

8) the power line of the hot blast gun tool shall not be arbitrarily connected or disassembled. When the power supply is far away from the tool operation and the power line is not enough, the coupler should be used to connect.

9) the plug and socket of the hot blast gun tool should be connected properly according to the regulations, and the protective grounding electrode in the plug and socket can only connect the protective ground wire (PE) in any case. It is forbidden to connect the protective grounding electrode with the working neutral wire directly in the plug and socket.

10) the dangerous movement of the hot air gun tools, the protection device of parts (such as shields, covers, etc.) shall not be disassembled arbitrarily.